2020 Bridgeview Manufacturing Inc. Bale Processors 6200

2020 Bridgeview Manufacturing Inc. Bale Processors 6200

Cut your feeding and bedding time by more than half!

Bridgeview’s Bale King 6200 Multi-Bale Processor carries 6 bales at once, three times more than a conventional processor. The cleated 2082 chain and big flotation skid shoes slide easily under the bale (without digging into the ground) for fast and clean loading.

The 6200 is built on proven technology and features our patented and reliable X-Rotor for easy twine removal. Save time, fuel, and wear and tear with the 6200, perfected over 25 years of use on Nebraska ranches.

Features may include:

• The Bale King 6200 features a durable tub and handles a 6' round bale with room to spare. As with all Bridgeview products, high-quality powder coat paint is standard.

• The forks sit well below chain level to prevent hangups with old or sagging bales.

• Twin Torflex axles, a low deck height, and wide wheelbase combine to give exceptional stability on rough ground.

• Dual 3" lift cylinders,self loading. Raise the deck, engage the conveyor chains. Back up and load 5 bales, load a bale in the tub and back up to load the 6th bale.

• High-torque chain drive motors give the operator confidence and fine speed control when loading.

• Like every Bale King processer, the 6200 comes with red/amber road lights and reflectors and SMV signage. Comes equipped with a standard 7-pin male trailer plug.

• With the use of a tapered designed idler sprocket twine wrapping and mud built up is minimal and are low maintenance and adjustable for optimal chain tension.

• Self-loading, cleated 2082 chain grabs hard into straw to load bales. The chain is canted inward for a positive grip on various bale sizes.

• Wide, low profile skid shoes get the chain and idlers underneath the bale without digging into the ground.

• Hoop crate is fully adjustable to control processing speed. Typical processing time is approximately 2 mins.

• Chainless design, all moving parts are driven by a direct hydraulic or PTO connection.

• Hydraulic beaters with big paddles grip deep into the bale to turn it more reliably than chains or cradles, helping to prevent bridging.

• Removing twine from a round rotor can be extremely frustrating. All Bale king processors feature the patented X-Rotor for easy twine removal. As twine wraps on the rotor, it bridges across the X-shape, allowing easy insertion of any knife or iron.

• Bale King heavy-duty 3/4" flails are welded to their bushings, not formed. Flail tip speed is up to 7,000 feet per minute during processing.

• Every X-Rotor undergoes a serious QC regimen before it leaves Bridgeview. Each rotor is harmonically balanced to minimize noise and vibration during operation and to maximize processing speed.

• Hydraulic deflector allows switching between bunk feeding mode and long range bedding mode without leaving the cab. Folds up for a narrow transport width. Right-hand discharge puts the action on the same side as your controls for reduced operator fatigue.

• The 6200’s tapered hitch allows tighter turns than possible with a straight hitch. Three clevis positions match your tractor’s hitch height to keep the unit nice and level.

• Only 3 hydraulic remotes are needed for full control of the 6200 when used with the provided control box. 1/2" Standard Male Hydraulic Ag Tips (Pioneer-style) come installed.